Browse Subcategories
Aero Minor
Bac Mono
Benetton
Bristol
Bucciali
Dome
Dubonnet
Duryea
Fitch
Formula One
Gemballa Mirage
Glaspar
Glickenhaus
Golden Arrow
Gordon
Griffith
Gumpert Apollo
Helmet
International Trucks
Jordan
Lykan Hypersport
Marcos
Marmon Wasp
Noble
NSU
Pegaso
Pescarolo
Red Bull Racing
Riley
Saleen
Saturn
Scion
Siata
Simca
Smart
Spyker
Squire
SSC
Stratos
Tanker
Tatra
Thomas Flyer
Timbs
Wanderer
Williams-Renault
Willys
Other Automakers
 |
This is the 2010 Devon GTX Two Tone Black with Chrome in 1:43 Scale by Esval Models.This model is hand painted and polished to a beautiful finish and has a sealed body. These diecast models are exceptionally accurate of scale, shape and detail. Interior detail is hand assembled and easily visible. Photo etched parts, die-cutting, tampo printing, and waterslide decals, are often used for a most aut... [ read more ] |
$109.95
|
 |
This is the 2010 Devon GTX with Spoiler in 1:43 Scale by Esval Models. This model is hand painted and polished to a beautiful finish and has a sealed body. These diecast models are exceptionally accurate of scale, shape and detail. Interior detail is hand assembled and easily visible. Photo etched parts, die-cutting, tampo printing, and waterslide decals, are often used for a most authentic repli... [ read more ] |
$109.95
|
 |
This is the 1948 Invicta Black Prince Saloon by Charlesworth in 1:43 Scale by Esval. This model is hand painted and polished to a beautiful finish and has a sealed body. These diecast models are exceptionally accurate of scale, shape and detail. Interior detail is hand assembled and easily visible. Photo etched parts, die-cutting, tampo printing, and waterslide decals, are often used for a most au... [ read more ] |
$109.95
|
 |
This is the 1964 Jensen P66 prototype White in 1:43 Scale by Matrix.This model is hand painted and polished to a beautiful finish and has a sealed body. Resin models are exceptionally accurate of scale, shape and detail. Each model is created using a variety of production processes, to achieve this precision. They are produced using a composite material referred to in the industry as resin ... [ read more ] |
$195.09
|
 |
This is the 1985 Koenig-Specials Spider in 1:18 Scale by Gt Spirit. This model is hand painted and polished to a beautiful finish and has a sealed body. GT-Spirit models are exceptionally accurate scale, shape and detail. Each model is created using a variety of production processes, to achieve this precision. They are produced using a composite material referred to in the industry as resin .... [ read more ] |
$169.95
|
 |
This is the 2020 NTT IndyCar Series #14 Enterprises, K-Line in 1:18 Scale by Greenlight. Drivers: Dalton Kellett / A. J. Foyt This model is hand painted and polished to a beautiful finish and has a sealed body. Resin models are exceptionally accurate of scale, shape and detail. Each model is created using a variety of production processes, to achieve this precision. They are produced using a... [ read more ] |
$64.95
|
 |
This is the 2020 NTT IndyCar Series #1 Josef Newgarden in 1:18 Scale by Greenlight. Team Penske, Hitachi This model is hand painted and polished to a beautiful finish and has a sealed body. Resin models are exceptionally accurate of scale, shape and detail. Each model is created using a variety of production processes, to achieve this precision. They are produced using a composite material ref... [ read more ] |
$64.95
|
 |
This is the 2020 NTT IndyCar Series #20 Ed Carpenter in 1:18 Scale by Greenlight. Ed Carpenter Racing, United States Space Force (USSF) This model is hand painted and polished to a beautiful finish and has a sealed body. Resin models are exceptionally accurate of scale, shape and detail. Each model is created using a variety of production processes, to achieve this precision. They are produced... [ read more ] |
$64.95
|
 |
This is the 2020 NTT IndyCar Series - #29 Andretti Autosport Genesys in 1:18 Scale by Greenlight. Driver: James Hinchcliffe This model is hand painted and polished to a beautiful finish and has a sealed body. Resin models are exceptionally accurate of scale, shape and detail. Each model is created using a variety of production processes, to achieve this precision. They are produced using a c... [ read more ] |
$64.95
|
 |
Coming soon in 2020. Pre Order Now! This is the AMC Pacer Silver in 1:18 Scale by LS Collectibles. This is a fine resin model with no openings. This model is hand painted and polished to a beautiful finish and has a sealed body. Resin models are exceptionally accurate of scale, shape and detail. Each model is created using a variety of production processes, to achieve this precision. They are prod... [ read more ] |
$194.00
|
 |
This is the Aurus Senat Black in 1:43 Scale by Schuco.Because Russian President Vladimir Putin wasn t very enthusiastic about either the technology or design of his former ZIL statesaloon, Mercedes-Benz vehicles were used in his fleet for years. In order to be able to go back to a Russian make again in the future,the Moscow-based engine development institute NAMI designed a new representative ... [ read more ] |
$99.95
|
 |
This is the Aurus Senat White in 1:43 Scale by Schuco. This model is hand painted and polished to a beautiful finish and has a sealed body. Resin models are exceptionally accurate of scale, shape and detail. Each model is created using a variety of production processes, to achieve this precision. They are produced using a composite material referred to in the industry as resin . Photo etche... [ read more ] |
$99.95
|
 |
This is the BR Engineering BR1 Gibson No.10 DragonSpeed 24H Le Mans 2019. Drivers: H. Hedman, B. Hanley, R. van der Zande Spark Models are hand painted, decorated and assembled.* Each model is created using a variety of production processes, such as hand cast resin, diecast zamak and injection molded thermo plastics.* Photo etched parts, die cutting, tampo printing and waterslide decals are ... [ read more ] |
$78.00
|
 |
This is the Cooper T51 #12 in 1:18 Scale by Schuco.The Cooper T51 was produced by the Cooper Car Company, which was founded by John Cooper in Surbiton, Surrey. The launch of this newvehicle heralded the beginning of the end for single-seater front-engined racing cars. Unlike previous Formula racing vehicles used bylarge factory teams such as Maserati, Ferrari, Mercedes-Benz and Vanwall, which were... [ read more ] |
$169.95
|
 |
This is the ENSO CLM P1/01 Gibson No.4 ByKolles Racing Team 24H Le Mans 2019 in 1:43 Scale by Spark. Drivers: T. Dillmann, O. Webb, P. Ruberti * Spark Models are hand painted, decorated and assembled.* Each model is created using a variety of production processes, such as hand cast resin, diecast zamak and injection molded thermo plastics.* Photo etched parts, die cutting, tampo printing a... [ read more ] |
$78.00
|
 |
This is the ORECA 07 - Gibson No.37 Jackie Chan DC Racing 24H Le Mans in 1:43 Scale by Spark. Drivers: D. Heinemeier Hanson, J. King, R. Taylor * Spark Models are hand painted, decorated and assembled.* Each model is created using a variety of production processes, such as hand cast resin, diecast zamak and injection molded thermo plastics.* Photo etched parts, die cutting, tampo printin... [ read more ] |
$78.00
|
 |
This is the Gibson No.38 Jackie Chan DC Racing 2nd LMP2 class 24H Le Mans 2019 in 1:43 Scale by Spark. Drivers: Tung, S. Richelmi, G. Aubry * Spark Models are hand painted, decorated and assembled.* Each model is created using a variety of production processes, such as hand cast resin, diecast zamak and injection molded thermo plastics.* Photo etched parts, die cutting, tampo printing and wa... [ read more ] |
$78.00
|
 |
This is the Sauber C7 No.18 24H Daytona 1984 Fomfor in 1:43 Scale by Spark. Drivers: A. Naon - D. Montoya - G. Valiente Limited edition of 300 pieces. Spark models are hand painted, decorated and assembled Each model is created using a variety of production processes, such as hand cast resin, diecast and injected molded thermo plastics. Photo etched parts, die-cutting, tampo printing and ... [ read more ] |
$78.00
|
 |
This is the Triumph TR250 Blue in 1:43 Scale by Schuco.This model is hand painted and polished to a beautiful finish and has a sealed body. Resin models are exceptionally accurate of scale, shape and detail. Each model is created using a variety of production processes, to achieve this precision. They are produced using a composite material referred to in the industry as resin . Photo etche... [ read more ] |
$94.95
|
 |
This is the Triumph TR250 Green in 1:43 Scale by Schuco. "As of the summer of 1967, the Triumph TR 5 became the successor to the Triumph TR 4A. The roadster, designed by Michelotti in Italy,differed from its predecessor externally only through the additional chrome trim on its sides and afew other small details. In orderto meet the exhaust emission standards of the extremely important US market at... [ read more ] |
$94.95
|
 |
This is the Yamaha OX99 11 Presentation 1992 Red in 1:43 Scale by Spark Spark models are hand painted, decorated and assembled Each model is created using a variety of production processes, such as hand cast resin, diecast and injected molded thermo plastics. Photo etched parts, die-cutting, tampo printing and waterslide decals are also used. Spark ensures the absolute best quality p... [ read more ] |
$78.00
|
[cancel]